LINET SafeSense 3, Instructions For Use And Technical Description

Page: 68 / 92

D9U001SFS-0101_03 68
Indicator Meaning
Warning will be triggered on each CareMonitor
user interface connected to the SafeSense® 3
system when corresponding status occurs during
activated monitoring (WARNINGS TURNED ON).
Warning will
not be triggered on any CareMonitor
user interface connected to the SafeSense® 3
system when corresponding status occurs during
activated monitoring (WARNINGS TURNED OFF).
Warnings visible on a single CareMonitor user in-
terface and audible from a single CareMonitor user
interface and sent to Nurse Call system.
Warnings not visible on a single CareMonitor user
interface and not audible from a single CareMo-
nitor user interface, but sent to the Nurse Call
system.
Click on this button to zero the countdown of the
Decubitus/Movement Notifi cation. If a set period
is changed, the countdown related to the previous
setting is not reset. RESET button serves to reset
the running countdown.
Abbreviation Meaning
Wetness Wetness Monitoring
Motion Motion Monitoring
Decubitus Decubitus/Movement
Notifi cation
Bed Exit Bed Exit Monitoring
RANGES OF VALUES
Periods for Bed Exit Monitoring are early (about 3 seconds) or 10
seconds or 20 seconds or 30 seconds or 40 seconds or 50 seconds or 1
minute or 5 minutes or 10 minutes or 15 minutes or 30 minutes.
Periods for Motion Monitoring are multiples of 5 minutes from 10 minutes
to 100 minutes.
Periods for Decubitus/Movement Notification are 2 hours or 3 hours or 4
hours or 5 hours or 6 hours.
Limits of the wetness sensitivity are 25% or 50% or 75% or 100%.
GLOBAL WARNINGS SETTINGS
To set Sensitivity of the Bed Exit Monitoring and Motion Monitoring:
► Click on low button or medium button or high button.
Fig. Global warnings settings