LINET Eleganza 3XC Page 32 User Manual And Technical Description Download | Manualshive

Page: 32 / 56

background image

32

9.8.2

i-

Brake® (optional)

It is possible to equip the bed with an automatic castor brake. The automatic castor brake prevents injuries of
patients and staff due to an unbraked bed.

The brakes are activated automatically 60 seconds after the bed is plugged in, and 60 seconds after they have
been released if the bed is not being moved.

It is possible to activate the brakes manually as well.

9.9

Mobi-Lift

®

Mobi-Lift

®

is optional. It serves as a support handle to enhance the

patient’s safety when getting up. Mobi-Lift

®

is

a support handle with a built-in height adjustment button. It allows the patient to raise and lower the mattress
platform.

Fig.

Mobi-

Lift® Handles

9.9.1

Operation of Support Handles

Warning

Risk of injury due to slipping or falling when standing up!



Ensure that the support handles are completely inserted in the sleeve fittings.



Ensure that no bed linen is caught between the sleeve fitting and the support
handle.

To adjust the support handle:



Pull the support handle out from under the mattress platform.



Lift the handle up towards the bed.



Push the handle into the sleeve fitting as far as it will go.

To adjust the height of the mattress platform:



Press the GO button (handset).



Press the button to adjust the height.

«
...
30
31
32
33
34
...
»

Summary of Contents for Eleganza 3XC

























































Reviews:

No comments

Related manuals for Eleganza 3XC

Brand: Califone Pages: 7

Brand: CALITEK Pages: 16

Brand: LAHTI PRO Pages: 20

Brand: LAHTI PRO Pages: 16

Brand: J&M Pages: 53

Brand: Qazqa Pages: 2

Brand: Danelec Pages: 67

Brand: NCR Pages: 20

Brand: DARAY Pages: 32

Body Armor Night Splint

Brand: Darco Pages: 2

Brand: MacDon Pages: 74

Brand: Gatekeeper Pages: 8

Bure Rise & Go DB 56-309

Brand: Gate Pages: 8

Brand: RBC Bioscience Pages: 24

Brand: S&C Pages: 16

Brand: S&C Pages: 23

Brand: Ultrawave Pages: 30

Brand: Ultrasound Technologies Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands