LINET Eleganza 3XC Page 47 User Manual And Technical Description Download | Manualshive

Page: 47 / 56

background image

47

15.2

Safety Checks

Warning

Incorrect safety checks can cause injuries!



Ensure that safety checks are performed by

seller´s

customer service or

authorised personnel (certified by the manufacturer) only.



Ensure that the safety checks are recorded in the service and maintenance log.

A defective bed can cause injuries!



Have a defective bed repaired immediately.



If the defect cannot be repaired, do not continue to use the bed.

Warning

In accordance with

§6 of the Medical Devices Operator Ordinance, the operator is required to perform a technical

safety check on the critical care bed every 12 months.

The procedure for performing the safety check is stipulated in VDE 0751 or IEC 601.1.

The manufacturer will give a certificate to service organisations in which the manufacturer declares that the

service organisation is qualified to perform maintenance on LINET

®

products.

LINET

®

makes every reasonable effort within research, design and manufacturing of beds to ensure that their

products are fit for purpose and product to the highest level of quality. However LINET

®

can take no responsibility

for any damage caused to the product or harm to patients, staff or other individuals as a result of:



Not following the instructions for use, including warning and caution statements, provided in their user
manuals,



Use of the product for other than its intended purpose as stated in any documentation provided by LINET

®

.

NOTE On request, the manufacturer will provide circuit diagrams, component part lists, descriptions, calibration
instructions etc. for service personnel for the repair of ME equipment designated by the manufacturer as repairably
by service personnel..

«
...
45
46
47
48
49
...
»

Summary of Contents for Eleganza 3XC

























































Reviews:

No comments

Related manuals for Eleganza 3XC

Brand: GE Pages: 802

Brand: iET Pages: 17

Brand: Dana Design Pages: 20

Brand: Mandam Pages: 9

Brand: ECE Pages: 2

Brand: Ecco Pages: 5

Evolution Series

Brand: Bakare Pages: 38

Brand: H&S Pages: 54

Brand: Samson Pages: 2

Brand: YASKAWA Pages: 81

Brand: YASKAWA Pages: 52

Brand: Turner Designs Pages: 55

Scanmate-B DGH 8000

Brand: DGH TECHNOLOGY Pages: 53

Brand: Monosem Pages: 104

Brand: Stahls Pages: 2

Brand: Kettler Pages: 20

Brand: Cutler-Hammer Pages: 45

Brand: NSF Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands