manualshive.com logo in svg

LINET Eleganza 3XC, User Manual And Technical Description, Page: 33 / 56

Share
Download
LINET Eleganza 3XC User Manual And Technical Description Download Page 33

 

33 

 

 

 
 
 
 

9.10 

Accessories

 

 

The use of incompatible accessories can injure the patient!

 

 

Use original accessories from the manufacturer only. 

 

 

Warning

 

 

NOTE 

The manufacturer is not responsible for the use of unapproved accessories.

 

 

9.10.1  Lifting Pole

 

 

 

Fig. 

Lifting Pole

 

To ensure safe use of the lifting pole:

 

 

Never exceed the maximum load of 75 kg. 

 

Never use the lifting pole for rehabilitation exercises. 

 

To prevent the bed from tipping over, ensure that the lifting pole does not project out from the bed. 

 

Replace the plastic handle every 4 years. 

Lifting Pole Positions:

 

 

Over the backrest (working position). 

 

Parallel to the head board. 

To install the lifting pole:

 

 

Insert the lifting pole in the corresponding sleeve fittings at the head of the bed (corners). 

 

Ensure that the safety pin locks into place. 

A plastic grab handle with an adjustable strap shall be attached to the lifting pole. 

 

NOTE 

The  date  of  manufacture  is  marked  on  the  grab  handle.  LINET

® 

recommends  that  you  replace  the 

plastic grab handle every four years.

 

Summary of Contents for Eleganza 3XC

























































Reviews:

No comments