LINET Eleganza 3 User Manual And Technical Description Download Page 41 | Manualshive

Page: 41 / 52

LINET Eleganza 3 User Manual And Technical Description Download Page 41

D9U001GZ5-0101_03

41

9.11.6 Holder for Anti-decubitus Mattress Compressor

Fig. 18

Holder for Anti-decubitus Mattress Compressor

The holder for the anti-decubitus mattress compressor is only to be used on bed ends.



Suspend the holder for the anti-decubitus mattress compressor from the foot end.

9.11.7 Safety Night Light

The night light is an optional accessory. It helps the nursing staff as well as the patient to orientate themselves at
night.

Requirements for Operation:



The main room lights must be dimmed or off.



Ensure that the bed is connected to the mains.

NOTE

The night light is turned off during battery operation.

9.11.8 Mattress Platform Element Covers

To facilitate cleaning, the mattress platform cover elements are removable. The cover plates provide additional
support for the mattress. To clean and disinfect the bed completely, remove the mattress platform covers.

9.11.9 Towel Holder

Fig. 19

Towel Holder

The towel holder is only suitable for plastic bed ends.

«
...
39
40
41
42
43
...
»

Summary of Contents for Eleganza 3





















































Reviews:

No comments