See the section “UPMAX ISC Home Screen When Logged In” below for detailed information.
The Locate Unit feature (4-1E), which causes the front panel display of the unit to flash for easy
identification in a crowded rack, can also be activated without logging in.
Additional information about installed options, clock sync, network status and IP address, power supply
status, software and FPGA versions, and unit uptime are displayed to the right of the screen (4-1F).
Figure 4-1 - Home screen when not logged in
Logging In
Making modifications to the UPMAX ISC’s configuration, signal routing, or transcoding parameters via the
remote user interface requires logging into the unit. At this time, only one level of access with is supported.
Enter the default password (1234) in the password field (4-1G) and click on the Log in button (4-1H). The
password can be changed on the System page.
To remotely power down the unit, click on the Shutdown Unit button (4-1I).
UPMAX ISC Home Screen When Logged In
Additional menus become visible once you are logged in. These include the upmixing controls for the
Program Audio (4-2A), the I/O menus (4-2B) which include clock, GPI/O, and delay controls, detailed
system-wide information and configuration settings (4-2C) which includes the IP configuration menu,
and the Log Out button (4-2D).
NOTE: This section is primarily an overview of the user interface to provide an explanation of the
