AERO.100 User Guide
©2016 TLS Corp. ALL RIGHTS RESERVED
Oct 2016
Page 82
If content is mixed with 5.1 surround and stereo programs then the 5.1 surround content is
placed on pairs 1, 2 and 3 (Lf/Rf, C/LFE, Ls/Rs). AUTOMAX will detect that C, Ls and Rs are all
below the user set threshold and upmix the Lf/Rf source on pair 1.
Occasionally stereo content is always present on a given pair. For example, stereo is always on
pair 1/2. When 5.1 surround is present it is on 3 entirely different pairs. For example, Pairs 3, 4
and 5.
AERO.100 can upmix pair 1 and automatically switch to the 5.1 surround pairs when 5.1
surround audio is present. If a program with stereo only content appears the AERO will switch
back to the stereo source.
To configure this example, select SDI 5/6, 7/8 and 9/10 as the sources for Program 1 Inputs 1/2,
3/4, 5/6. See Figure 6-1.
Instance 1 > Input > Source
Figure 6-1:
Instance 1, Source select for DRC Program 1
To set the stereo source select input 1/2 as the Lt/Rt source on the UPMAX Program 1 Auto
Mode tab. See Figure 6-2.
Instance 1 > UPMAX II Program 1 > Auto Mode Settings
