SAFETY PRECAUTIONS
2
CAUTION
WORKING
PLACE
This machine should be put at the dry and clean place, do not put it
at the damp place or near the exit of cooling appliances.
This machine should be put on the horizontal and firm place. In
front and rear of the machine, there should be sufficient place for
the document in and out.
Do not put any articles on the machine.
LAMINATING
FILM
Please use good quality laminating film, in order to show the
lamination effect, and avoid the entanglement.
OBJECT
The laminating machine use the hot press technology, do not use the
following objects in case laminating failure or laminating film
entangle.
1.Easy-burnt material, easy-softened material
2.The document printed by heat-sensitive paper, or any articles
that can be faded or transformed after heating.
3.Any articles that have drape, breakage, dampness or
deformation before laminating.
4.Coin or any other hard articles.
means exception while cold laminating operation.
Do not attempt to laminate articles that exceed total recommend
material thickness.
MACHINE
OPERATION
Do not turn to other usages except the usage range stated in this
operation manual.
Do not use the machine outside the room. Before leaving, please cut
off the power supply if the operation is over.
If there are any problems on the machine, please do not use it,send
it to the dealer for repairing.
While operating the machine, mind the children nearby, in case any suddenness.
Do not suspend the electrical wire on the table or cabinet or any other places
that the children can touch, or place easy stumble persons.
Using the accessory that not recommended or sold by the manufacturer, might
cause damage on the machine.
The photo or document once is laminated, it will become permanent and will
not be taken apart.
Please do not laminate the collected rare articles, or some articles might be
taken out in the future.
ADVICES
