User Manual
English
TV Wall (3)
1. Output H&V Value setup allows you to adjust individual outputs A
–
D to a specific position and from
horizontal and vertical position of 0
–
255. This setting is used to fine tune your TV wall array in case
of issues with the default set up.
2. Refresh just the TV Wall (3) page with one click, no other information is refreshed, click Refresh
before adjusting the settings to ensure you have the correct base values.
3. Reset all the settings from the TV Wall (3) page back to factory defaults.
TV Wall (4)
1.
After configuring your array in TV Wall (2), click on FAV 1
–
5 under Save TV Wall Settings to store
these values.
2.
Click FAV 1
–
5 under Recall TV Wall Settings to use one of the previously saved TV Wall
configurations.
1
2
3
1
2
