User Manual
English
System Configuration
Connect Interface
1. Click
Connect
to connect to the Scaler, at this point the settings will refresh (other than Image Adjust
which is handled separately. If you are using multiple Scalers, select the Scaler you want to connect
to using the
MAC
dropdown box and then press connect.
2. To disconnect a Scaler or multiple Scalers follow the step above but using
Disconnect
.
3. When using multiple Scalers it is important to be able to identify the location of the Scalers screens
so that the image is correctly split. You can use the
Model No.
field to identify the Scaler, making
configuration of the video wall more straight forward.
System Settings
1. Click
Power ON
to switch the Scaler on. If you’re using multiple Scalers then check the
ALL IP
box
next to Power ON and then click
Power ON
to switch all Scalers on.
2. Click
Factory Reset
to return the Scaler back to its default settings. If you’re using multiple Scalers
then check the
ALL IP
box next to Factory Reset and then click
Factory Reset
to reset all of the
Scalers.
3. Click
Refresh
to re-read the configuration from the Scaler.
Network Configuration
1. From the
Address Type
field drop down, choose either DHCP or STATIC and then click
Set IP
and
wait for a few seconds for the setting to be applied.
2. If you are using a static IP complete the IP Address, Net Mask and Default Gateway fields and then
click
Set IP
and wait for a few seconds for the setting to be applied.
