User Manual
English
Video Wall Configuration
TV Wall (1)
1. Bezel Correction can be switched ON or OFF here according to your requirement
2. If you are using multiple Scalers ensure that you select ALL IP before setting Bezel Correction to
ON/OFF
3. Quick Video wall layout options from 1 x 1 to 6 x 6, simply select the configuration you require.
TV Wall (2)
1. Select an Output Channel A
–
D and then set the layout of the Video wall using Column (1
–
15) and
Row (1
–
15). Finally select the position of this Output in the video wall and then click Send; Rows
are counted from Top to Bottom and Columns from Left to Right. So in a 3 x 3 video wall
configuration Out Position 1 would be the Top Left of the video wall and Out Position 9 would be
bottom right.
2. Output Ch.4 Bypass ON/OFF allows you to determine whether Output D is used in Standard or
Cascade mode.
3. H Correction allows the horizontal position of each Output
’
s display to be adjusted for Bezels.
4.
V Correction allows the vertical position of each Output’s display to be adjusted for
Bezels.
1
2
3
1
2
3
4
