User Manual
English
To configure the Video Wall further please refer to the following Configuration section of this manual.
To add expand upon the basic 2 x 2 video wall it is possible to cascade further Scalers by connecting
Output D to the HDMI Input of the next Scaler, as shown below.
This cascading can be repeated up to 75 layers allowing a maximum of 225 displays to be connected.
Configuration
To begin the configuration process please download the software application from www.lindy.com,
alternatively you can configure the Scaler using RS-232 or Telnet as described later in this section.
Please note:
Before beginning the software installation, please ensure that any previous versions have
been removed.
1. Navigate to the location that you saved the downloaded file and run the Setup.exe file.
2. When prompted by Windows allow the software access to your network.
3. You will now be presented with the TV Wall Set screen as show here, click
Search MAC
to find the
Scaler on your network. You will need to repeat this step whenever the Scaler has been power
cycled or reset. Once the software has found a Scaler you can begin configuring its settings.
DVD
PC
HDMI IN
Control
HDMI OUT
D C B A
A1
B1
A2
B2
C1
C2
HDMI IN
Control
HDMI OUT
D C B A
Router
