User Manual
English
Item
Command
Description
Parameter
6=2x3, 7=3x2,
8=3x4, 9=4x2,
10=4x3, 11=4x5,
12=1x2, 13=2x1,
14=1x3, 15=3x1,
16=1x4, 17=4x1,
18=2x4, 19=3x5,
20=5x4, 21=5x3,
22=6x2, 23=6x3
TV Wall (continued)
SFAVE 1~5
Save Favorite Setting
RFAVE 1~5
Recall Favorite
Setting
RBY
Request Bypass
Setting
0=non Bypass,
1=Bypass
SBY 0/1
Set Bypass Setting
Telnet Control
Before attempting to use the Telnet control, please ensure that both
the Scaler (via the ‘CONTROL’
port) and the PC/Laptop are connected to the same active network.
To access the Telnet control in Windows 7/10, click on the
‘Start’
menu and type
“cmd” in
the Search
field then press enter Under Windows XP go to the
‘Start’
menu and click on
“Run”,
type
“cmd”
with
then press enter.
Under Mac OS X, go to
Go→Applications→Utilities→Terminal
Once in the command line interface (CLI) type “telnet”, then the "IP
address" of the Scaler and hit
enter. Only when the Telnet port (device port) is not set to 23 will the number "device port" then need
to be entered after IP address (device IP) and before hit enter.
This will bring us into the device which we wish to control. Type "HELP" to list the available commands.
Please Note:
All the commands will be not executed unless followed by a carriage return. Commands
are case-insensitive. If the IP is changed then the IP Address required for Telnet access will also change
accordingly.
