LINDY CPU Switch Dual Multi-Platform Installation and Use
Page 58
additional rows (up to 512 computers). The ADMIN user will always be granted
access to all computers regardless of the values entered.
USERS
ADMIN Alan
Jim
Sue
Test
PASSWORDS
password letmein hello
logmein
Test
COMPUTERS
PORT
Admin PC
2103
1
1
1
1
Alan's System
2102
1
1
1
Comms Server
3
1
1
Comms PC
4
1
1
1
1
Gateway 1
8
1
Gateway 2
5
1
Test System
15
1
1
Web Browser
9
1
1
1
To restore the saved / edited menu and configuration settings:
1.
Connect the serial port on the rear of the LINDY CPU Switch Dual MP to a serial
COM port on your computer using the serial cable supplied with the LINDY CPU
Switch.
2.
Copy the program LDYWRITE and LDYDATA.CSV into the same directory on the
PC that is connected to the LINDY CPU Switch’s serial port.
3.
Run the program LDYWRITE.EXE and follow the instructions given by the
program.
4.
Make sure that you are logged onto the LINDY CPU Switch as the ADMIN user.
From the main selection screen press F1 for
More Menus
. In the
Configuration
Menu
select
Functions
. In the
Functions
menu select
Read Data from RS232
port.
5.
The LINDY CPU Switch should then receive the configuration data to your
computer and load the new menu names and access rights into the menu.
4.20 Switching channels by sending RS232 data
You can switch the LINDY CPU Switch Dual MP remotely by sending RS232 data to
the serial communications port (located on the rear panel adjacent to the power
All manuals and user guides at all-guides.com
