48
Advanced Features
Connecting a USB Storage Device
1.
Switch off the TV before connecting any USB
storage device.
2.
Connect your USB storage device to the USB
port of your TV.
3.
Plug the connected devices into the mains socket
before switching on the TV.
4.
Press the
button on the rear panel of the TV
or on the remote control to turn on your TV
and your USB storage device.
5.
Press the
INPUT
button on the TV or on the
remote control to display the
INPUT SOURCE
list. Use the
buttons to select
USB
and
then press the
OK
button to confirm.
3.
Press the buttons to select your storage device and then press
the
OK
button.
Viewing Photos
1.
Press the
INPUT
button on the TV or on the remote control to
display the
INPUT SOURCE
list. Then press the
buttons to
select the
USB
mode and then press the
OK
button.
2.
Press the buttons to select
PHOTO
and then press the
OK
button.
Rear Right Side View of TV
USB
HDMI
R
L
AV INPUT
VIDEO
USB Cable
(not included)
USB
Adapter
Portable
hard Disk
USB Hub
• If a hard disk is used, make sure its mains adapter is connected to the mains supply.
• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption
may exceed 500mA.
• The maximum supported storage space of the hard disk is 2 TB (FAT32).
• The file system only supports FAT32 format.
• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not
be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement
will be shown on the screen. If this happens, please upgrade your USB storage device.
• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is
normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.
• Disconnect the USB storage device if it is not in use.
• Supports USB2.0 only.
Summary of Contents for L24HTC17a
Page 2: ......
