33
Installation instructions
Plexus
We reserve the right to make changes
2019-06-20
lindab | we simplify construction
7. Maintenance
The interval of cleaning depends on the indoor environment where the beam is placed. Under optimal conditions the
beams only need cleaning every 5 years.
• Open the inlet plate using no tools (7.2)
• Clean the battery downside and the inlet faceplate inner parts with a dust cleaner / vacuum cleaner.
• Only use lukewarm water and a mild detergent and a piece of wet cloth to clean the inlet face plate.
• Open the inspection hatch (7.3)
• Clean the air plenum chamber and air connection with a vacuum cleaner
• Lower battery if water pipe connections are connected to system by flexhoses. ( Otherwise this is not possible,
See7.4).
• Clean the top side of the battery, nozzle plate, JetCones and the mixing chamber with a dust cleaner / vacuum
cleaner
.
7.1 Remove the outlet front grille
Not relevant for Plexus.
7.2 Open inlet faceplate
7.3
Opening
inspection
hatch
Service wires