12
Picture 8.b
Push-on fitting on
We reserve the right to make changes
2019-06-20
Installation instructions
Plexus
We reserve the right to make changes
2019-06-20
We reserve the right to make changes
2019-06-20
lindab | we simplify construction
4.1.3 Compression fitting
• While mounting a compression fitting, the pipe will be exposed to a big amount of force, creating a risk of crushing
the pipe. To ensure that the pipe will not
be crushed when mounting the compression fitting, a copper insert must be
inserted into the pipe (always part of the delivery).
• The copper insert should be placed inside the pipe on the beam. Always support the copper pipe coil when inserting
the copper insert into position.
• Mount a compression coupling and/or a valve to the pipe. Don’t stress the nut too much, since this may crush the pipe.
• Please refer to the suppliers manual.
4.1.4 Flexible hoses
• Our flexible hoses can be used with both push-on and compression fitting. We recommend to use Tectite fittings, for
easier and faster mounting.
• Mount a push-on valve to the pipe. Make sure the valve has the correct flow direction (see indication arrow on the valve)
and that you have the correct valve, when integrated valve has been chosen (see indication on valve or follow cabelling
to Regula Connect card). Cooper inserts aren’t required !
• Mount a push-on fitting to the pipe. Make sure to press the fitting all the way onto the pipe. Cooper inserts aren’t
required !
4.1.2 Push-on fitting