Non-Monitored Pump
The non-monitored pumps have two rotary dial switches on the PC board to set the
On
and
Off
time.
“
On Time
” is how long the pump will run and the “
Off Time
” is the interval between run times. The
Blue dial on the left sets the Off or Pause time. The Red dial on the right sets the On time. Notice the
LED’s on both side of the switches. Refer to the pump service page for the codes to set each.
LED lights up when
pump is in operation
LED lights up when
power is applied to the
PC board.
Manual Lube Pushbutton
Depress for 2 seconds to
initiate a manual lube
event
2/13/09
16
