Manually Lubricating Bearings using grease gun
If the need arises to manually lube the bearings, it can be done without the pump. A manual process is
available using a grease gun.
There is a grease fitting located on all of the divider valves in a Quicklub system. Use a grease gun
and attach the hose to the grease fitting. As grease is pumped into the valve, the bearings will be
lubricated and the cycle indicator pin on the side of the divider valve will be cycling in and out.
The picture below shows a Lincoln battery operated Power Luber as the grease gun supplying the
grease.
Grease fitting located near
inlet of divider valve
2/13/09
1
9
