Opening and Closing the Moonroof
Press and release the
SLIDE
control to
open the moonroof. The moonroof will
stop short of the fully opened position.
Note:
This position helps to reduce
rumbling wind noise which may happen
with the moonroof fully open. Press and
release the control again to fully open the
moonroof.
Pull and release the
SLIDE
control to
close the moonroof.
Bounce-Back
The moonroof will stop automatically while closing and reverse some
distance if there is an obstacle detected.
Pull and hold the
SLIDE
control within two seconds of a bounce-back
event to override the function. While bounce-back is active, the closing
force increases for each of the next three times the moonroof is closed.
Venting the Moonroof
Press and release the
TILT
control to move the moonroof to the vent
position. Pull and hold the
TILT
control to close the moonroof.
Windows and Mirrors
101
2014 Navigator
(nav)
Owners Guide gf, 1st Printing, June 2013
USA
(fus)