Subject to modifications
User Manual
LMC 1
9.3EN-98001-A07
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Page 29 of 36
COBRA chain-lubrication systems, continued
Operating mode
The following parameters are controlled or monitored for
COBRA chain-lubrication systems via the standard LMC 1
programming:
Variable:
- Nipple cleaning time
- Cycle-dependent lubrication
- Number of pause cycles
- Number of chain links
Fixed:
- Filling time monitoring 1 min.
Connection
6618b06
Fig. 30
Signal input connection
A - External contact, chain forwards
B - Chain sensor
C – Low-level signal
D – Lubricant pressure
E – Air pressure switch
F - Malfunction, right side
G - Malfunction, left side
H - Locking
6612b06
Fig. 31
Control output (ACTUATOR) connection
Q1 - Pump
Q2 - System (ready for operation)
Q3 - Clean
Q4 - COBRA 1X-1
Q5 - COBRA 1X-2
PE - Protective earth conductor
L+ - Power supply
+
M - Power supply
–
