Subject to modifications
User Manual
LMC 1
9.3EN-98001-A07
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Page 25 of 36
Centro-Matic
®
systems, continued
Operating mode
The following parameters are controlled or monitored via
the standard LMC 1 programming for Centro-Matic
®
systems:
Variable:
- Pause time
- Monitoring time
- Switch-off delay time
Connection
6614b06
Fig. 24
Signal input connection
A - External contact
1)
B – Pressure switch 1
C – Low-level signal
D – High-level signal
E – Pressure switch 2
F - Reserve
G - Additional lubrication
H - Remote reset
1)
Time stop respectively lubrication stop
6612b06
Fig. 25
Control output (ACTUATOR) connection
Q1 - Pump
Q2 - System (ready for operation)
Q3 - Lubrication active
Q4 - Relief
Q5 - Reserve
PE - Protective earth conductor
L+ - Power supply
+
M - Power supply
–
