Subject to modifications
User Manual
Operation Instructions
2.1A-39002-B07
Page 5 of 24
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Safety Instructions
Appropriate Use
The hydraulic operated lubrication pump model HTL 101 is
designed for initial or for subsequent retrofit installation. It is
designed for:
1. the automatic lubrication of hydraulic hammers;
2. the automatic lubrication of hydraulically driven units.
The pump is able to deliver lubricants and chisel pastes up to
NLGI - class 2.
Misuse
Any use of the hydraulic operated lubrication pump HTL 101
that is not expressly mentioned in this user‘s manual will be
regarded as misuse.
If the hydraulic operated lubrication pump HTL 101 is used or
operated in a different manner other than specified, any claim
for warranty or liability will be null and void.
6001a02
NOTE
If personal injury or material damage
occurs as a result of inappropriate opera-
tion, e.g. if the safety instructions are
ignored or resulting from incorrect installa-
tion of the hydraulic operated lubrication
pump HTL 101, no claims or legal actions
may be taken against Lincoln GmbH.
General Safety Instructions
Hydraulic operated lubrication pumps model HTL 101:
- are designed with state-of-the-art technology.
- can be assembled for safe operation.
Incorrect use may result in bearing damage caused by
under- or over-lubrication.
Modifications or alterations to an installed system by the
customer are subject to prior consultation with the manu-
facturer of the lubrication system or with its appointed
dealers.
Hydraulic operated lubrication pumps model HTL 101:
- are not to be installed in the lower area of the hammer,
- must be installed in such a way that the operator can
always see the position of the low-level indicator of the
follower piston.
After each cartridge replacement be sure that the pump
delivers lubricant.
Accident Prevention Regulations
To prevent accidents, observe all city, state or provincial and
federal safety regulations of the country in which the hydraulic
operated lubrication pump HTL 101 will be used.
Operation, Maintenance and Repair
1013A94
ATTENTION!
Before beginning with maintenance or
repair work to the lubrication pump HTL
101, ensure that the hydraulic system of
the carrier unit (the supply to the lubrica-
tion pump) is depressurized.
1013A94
ATTENTION!
It is absolutely forbidden to carry out main-
tenance or repair work and to replace the
cartridge while the hydraulic unit is in op-
eration.
Repairs
Repairs are only to be performed by authorized and qualified
persons who are familiar with all applicable regulations.
