Lincoln Centro-Matic P653S, Manual

Page: 3 / 48

Page Number - 3
Form 404372
Electric Operated Centro-Matic Pump P653S
Explanation of Symbols Used
The following description standards are used in this manual:
Safety Instructions
Structure of safety instructions:
- Pictogram
- Signal words
- Danger text
- Danger notes
- How to avoid danger
The following pictograms are used in this manual and are com-
bined with corresponding signal words:
- ATTENTION
- CAUTION
- WARNING
- ATTENTION
- CAUTION
- WARNING
- NOTE
- IMPORTANT
The signal words give the seriousness of danger if the follow-
ing text is not observed:
ATTENTION refers to faults or damages on machines.
CAUTION refers to bad damages and possible injuries.
WARNING refers to possible dangerous injuries.
NOTE indicates improved operation of the device.
IMPORTANT indicates special operating features of the de-
vice.
Example:
ATTENTION!
When making use of other than the tested
spare parts, serious damage may affect
your device.
Therefore, for the operation of your device
always use original parts made by Lincoln
Industrial.
Furthermore, you will find the following text symbols in this
manual:
• Listing of applicable statements
- Sub point of applicable statements
1. Determination of the number or sequence of contents
→ Procedural instruction
User’s Responsibility
To ensure the safe operation of the unit, the user is responsible
for the following:
1. The pump/system shall be operated only for the intended
use (see next chapter “Safety Instructions”) and its design
shall neither be modified nor transformed.
2. The pump/system shall be operated only if it is in a proper
functioning condition and if it is operated in accordance with
the maintenance requirements.
3. The operating personnel must be familiar with this Owner
Manual and the safety instructions mentioned within, and
observe these carefully.
The correct installation and connection of tubes and hoses, if
not specified by Lincoln Industrial, is the user’s responsibility.
Lincoln Industrial Technical Services will gladly assist you with
any questions pertaining to the installation.
Environmental Protection
Waste (e.g. used oil, detergents, lubricants) must be disposed
of in accordance with relevant environmental regulations.
Service
The personnel responsible for the handling of the pump/sys-
tem must be suitably qualified. If required, Lincoln Industrial
offers you full service in the form of advice, on-site installation
assistance, training, etc. Please contact the Technical Service
department for assistance.
In the event of inquiries pertaining to maintenance, repairs
and spare parts, we require model specific data to enable
Technical Services to clearly identify the components of your
pump/system.
Therefore, always indicate the part, model and series
number.
Introduction
████████████████████████████████████████████████████████████████████████████████████████████