Note:
For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey™ system
status menus will include the remote start system as an additional key in
the total count. See the
Check MyKey™ system status
section.
Note:
For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys™, in which case, you will need to use
your remote start system to reset all MyKeys™ as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the
Clear MyKey™
section.
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey™
•
Key in the ignition is already a
MyKey™.
•
Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key).
•
SecuriLock
威
Passive Anti-Theft
System is disabled or in unlimited
mode
•
Vehicle has been started using a
remote start system that is
programmed as MyKey™. Refer to
Using MyKey™ with remote start
systems
section.
Cannot program the MyKey™
optional settings
•
Key in the ignition is a MyKey™
•
No MyKeys™ are programmed to
the vehicle. Refer to
Create a
MyKey™
section
•
Vehicle has been started using a
remote start system that is
programmed as a MyKey™. Refer to
Using MyKey™ with remote start
systems
section.
Locks and Security
93
2011 MKZ
(378)
Owners Guide, 1st Printing
USA
(fus)
