To open the dual panel moon
roof:
Press and release the SLIDE
control. The moon roof will
automatically open. If the sunscreen
is closed, it will automatically open
prior to opening the moon roof.
WARNING:
When closing the dual panel moon roof, you should
verify that it is free of obstructions and ensure that children
and/or pets are not in the proximity of the roof opening.
To close the dual panel moon roof:
Pull down the SLIDE control and
release. The moon roof will automatically close.
Bounce-back:
When an obstacle has been detected in the moon roof
opening as the moon roof is closing, the moon roof will automatically
open and stop at a prescribed position.
Bounce-back override:
To override bounce-back function, pull and hold
the SLIDE switch within two seconds of a bounce-back event. The
closing force will begin to increase each time the moon roof is closed for
the first three closing cycles, with bounce-back active. For example:
Bounce-back can be used to overcome the resistance of ice on the moon
roof or seals.
To vent the dual panel moon roof:
Press and quickly release the TILT
control (moon roof is equipped with, automatic, one-touch, tilt open
feature).
The moon roof must be in the closed position in order to
move it into the vent position.
To close dual panel moon roof from vent:
Pull and quickly release
the TILT control down to close the glass from the vent position to close
(moon roof is equipped with automatic, one-touch, tilt close feature).
Note:
You can open and close the vehicle’s windows and moon roof (if
equipped) by using the control on the remote transmitter. Refer to
Power windows
earlier in this chapter.
Driver Controls
92
2011 MKS
(mks)
Owners Guide, 1st Printing
USA
(fus)
