NO KEY DETECTED (if equipped)
— Displayed if the Intelligent
Access Key is not detected by the system in the following three
scenarios:
•
When the start/stop button is pressed in an attempt to either start the
engine or cycle through the ignition states.
•
When the engine is running and a door is opened then closed.
•
When the vehicle’s speed exceeds 10 mph (16 km/h) for the first time
after starting. Refer to
Push button start system
in the
Driving
chapter
for more information.
RESTART NOW OR KEY IS NEEDED (if equipped)
— Displayed
when the start/stop button is pressed to shut off the engine and a
Intelligent Access Key is not detected inside the vehicle. Refer to
Push
button start system
in the
Driving
chapter for more information.
ACCESSORY POWER ACTIVE (if equipped)
— Displayed when the
vehicle is in the accessory ignition state.
STARTING SYSTEM FAULT (if equipped)
— This message is
displayed when there is a problem with your vehicle’s starting security
system; your vehicle will not be able to start. See your authorized dealer
for service.
KEY PROGRAMMED 3 KEYS TOTAL (if equipped)
— Displayed
during spare key programming, when a third Intelligent Access Key is
programmed to the system.
KEY PROGRAMMED 4 KEYS TOTAL (if equipped)
— Displayed
during spare key programming, when a fourth Intelligent Access Key is
programmed to the system.
MAX # OF KEYS LEARNED (if equipped)
— Displayed during spare
key programming, after a fourth Intelligent Access Key is programmed or
upon entering spare key programming mode with four Intelligent Access
Keys already programmed to the vehicle.
MYKEY ACTIVE DRIVE SAFELY
— Displayed at startup when
MyKey™ is in use. Refer to
MyKey™
in the
Locks and Security
chapter
for more information.
KEY COULD NOT PROGRAM
— Displayed when an attempt is made
to program a spare key using two existing MyKeys. Refer to
MyKey™
in
the
Locks and Security
chapter for more information.
Instrument Cluster
27
2011 MKS
(mks)
Owners Guide, 1st Printing
USA
(fus)
