manualshive.com logo in svg

Lincoln 2009 MKX, Owner'S Manual

The Lincoln 2009 MKX Quick Reference Manual is an essential companion for every MKX owner. This comprehensive manual provides easy-to-follow instructions, tips, and explanations, ensuring an optimal driving experience. Seamlessly download this must-have manual for free from our website, manualshive.com, to unlock the full potential of your Lincoln MKX.

Share
Download
background image

CDs with homemade paper
(adhesive) labels should not be
inserted into the CD player as
the label may peel and cause the
CD to become jammed. It is
recommended that homemade
CDs be identified with
permanent felt tip marker rather
than adhesive labels. Ballpoint pens may damage CDs. Please
contact your authorized dealer for further information.

Audio system warranty and service

Refer to the

Warranty Guide/Customer Information Guide

for audio

system warranty information. If service is necessary, see your dealer or
qualified technician.

Satellite radio information (if equipped)

Satellite radio channels:

SIRIUS broadcasts a variety of music, news,

sports, weather, traffic and entertainment satellite radio channels. For
more information and a complete list of SIRIUS satellite radio channels,
visit www.sirius.com in the United States, www.sirius-canada.ca in
Canada, or call SIRIUS at 1–888–539–7474.

Satellite radio reception factors:

To receive the satellite signal, your

vehicle has been equipped with a satellite radio antenna located on the
roof of your vehicle. The vehicle roof provides the best location for an
unobstructed, open view of the sky, a requirement of a satellite radio
system. Like AM/FM, there are several factors that can affect satellite
radio reception performance:

•

Antenna obstructions: For optimal reception performance, keep the
antenna clear of snow and ice build-up and keep luggage and other
material as far away from the antenna as possible.

•

Terrain: Hills, mountains, tall buildings, bridges, tunnels, freeway
overpasses, parking garages, dense tree foliage and thunderstorms can
interfere with your reception.

•

Station overload: When you pass a ground based broadcast repeating
tower, a stronger signal may overtake a weaker one and result in an
audio mute.

Unlike AM/FM audible static, you will hear an audio mute when there is
a satellite radio signal interference. Your radio display may display NO
SIGNAL to indicate the interference.

SIRIUS satellite radio service:

SIRIUS Satellite Radio is a subscription

based satellite radio service that broadcasts music, sports, news and

2009 MKX

(mkx)

Owners Guide, 1st Printing
USA

(fus)

Entertainment Systems

29

Summary of Contents for 2009 MKX





















































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKX

Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
TATA Motors nano genX Owner'S Manual preview
nano genX
Brand: TATA Motors Pages: 156
Dometic PERFECTVIEW CAM80AHD Installation And Operating Manual preview
PERFECTVIEW CAM80AHD
Brand: Dometic Pages: 196
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
Audi 2001 A3 Quick Reference Manual preview
2001 A3
Brand: Audi Pages: 4
Thule Brink 5324 Fitting Instructions Manual preview
Brink 5324
Brand: Thule Pages: 15
Metra Electronics 99-3305 Installation Instructions Manual preview
99-3305
Brand: Metra Electronics Pages: 12
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3
CITROËN c4 picasso 2006 Owner'S Manual preview
c4 picasso 2006
Brand: CITROËN Pages: 266
American muscle 71324 Manual preview
71324
Brand: American muscle Pages: 3

Brands by name

Popular brands

Load more brands