manualshive.com logo in svg

Lincoln 2009 MKX, Owner'S Manual

The Lincoln 2009 MKX Quick Reference Manual is an essential companion for every MKX owner. This comprehensive manual provides easy-to-follow instructions, tips, and explanations, ensuring an optimal driving experience. Seamlessly download this must-have manual for free from our website, manualshive.com, to unlock the full potential of your Lincoln MKX.

Share
Download
background image

Continued operation will increase the engine temperature:

•

The engine will completely shut down.

•

Steering and braking effort will increase.

Once the engine temperature cools, the engine can be re-started. Take
your vehicle to an authorized dealer as soon as possible to minimize
engine damage.

When fail-safe mode is activated

You have limited engine power when in the fail-safe mode, so drive the
vehicle with caution. The vehicle will not be able to maintain high speed
operation and the engine will run rough. Remember that the engine is
capable of completely shutting down automatically to prevent engine
damage, therefore:

1. Pull off the road as soon as safely possible and turn off the engine.

2. Arrange for the vehicle to be taken to an authorized dealer.

3. If this is not possible, wait a short period for the engine to cool.

4. Check the coolant level and replenish if low.

WARNING:

Never remove the coolant reservoir cap while the

engine is running or hot.

5. Restart the engine and take your vehicle to an authorized dealer.

Driving the vehicle without repairing the engine problem
increases the chance of engine damage. Take your vehicle to an
authorized dealer as soon as possible.

FUEL FILTER

Your vehicle is equipped with a lifetime fuel filter that is integrated with
the fuel tank. Regular maintenance or replacement is not needed.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

WARNING:

Do not overfill the fuel tank. The pressure in an

overfilled tank may cause leakage and lead to fuel spray and fire.

2009 MKX

(mkx)

Owners Guide, 1st Printing
USA

(fus)

Maintenance and Specifications

278

Summary of Contents for 2009 MKX





















































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKX

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Ecco Vantage 12 Series Installation And Operation Instructions preview
Vantage 12 Series
Brand: Ecco Pages: 5
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
Mitsubishi MOTORS OUTLANDER PHEV 2022 Manual preview
OUTLANDER PHEV 2022
Brand: Mitsubishi MOTORS Pages: 8
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
Butts of Bawtry TBT4700 Quick Start Manual preview
TBT4700
Brand: Butts of Bawtry Pages: 2
Belkin LineCast Auto FM User Manual preview
LineCast Auto FM
Brand: Belkin Pages: 15
Rover 75 Saloon Owner'S Handbook Manual preview
75 Saloon
Brand: Rover Pages: 285
Xpresskit 20110601 Installation Manual preview
20110601
Brand: Xpresskit Pages: 12
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18

Brands by name

Popular brands

Load more brands