manualshive.com logo in svg

Lincoln 2009 MKX, Owner'S Manual

The Lincoln 2009 MKX Quick Reference Manual is an essential companion for every MKX owner. This comprehensive manual provides easy-to-follow instructions, tips, and explanations, ensuring an optimal driving experience. Seamlessly download this must-have manual for free from our website, manualshive.com, to unlock the full potential of your Lincoln MKX.

Share
Download
background image

(Phone):

Your vehicle may be equipped with SYNC which has

special phone features. Refer to the

SYNC

supplement for further

information. If your vehicle is not equipped with SYNC, the display will
read NO PHONE.

4.

MENU:

Press MENU repeatedly

to scroll through the following
modes:

Setting the clock:

Press MENU until SET HOURS, SET MINUTES and

SET AM/SET PM is displayed. Use

/

to manually adjust. Press

MENU again to disengage clock mode.

SATELLITE RADIO MENU (if equipped):

Press MENU when satellite

radio mode is active to access. Press OK to enter into the satellite radio
menu. Press

/

to cycle through the following options:

•

CATEGORY:

Press OK to enter category mode. Press

/

to

scroll through the list of available SIRIUS channel Categories (Pop,
Rock, News, etc.) Press OK when the desired category appears in the
display. After a category is selected, press SEEK to search for that
specific category of channels only (i.e. ROCK). You may also select
CATEGORY ALL to seek all available SIRIUS categories and channels.
Press OK to close and return to the main menu.

•

SAVE SONG:

Press OK to save the currently playing song in the

system’s memory. (If you try to save something other than a song,
CANT SAVE will appear in the display.) When the chosen song is
playing on any satellite radio channel, the system will alert you with
an audible prompt. Press OK while SONG ALERT is in the display and
the system will take you to the channel playing the desired song. You
can save up to 20 songs. If you attempt to save a song when the
system is full, the display will read REPLACE SONG? Press OK to
access the saved songs and press

/

to cycle through the saved

songs. When the song appears in the display that you would like to
replace, press OK. SONG REPLACED will appear in the display.

•

DELETE SONG:

Press OK to delete a song from the system’s

memory. Press

/

to cycle through the saved songs. When the

song appears in the display that you would like to delete, press OK.
The song will appear in the display for confirmation. Press OK again
and the display will read SONG DELETED. If you do not want to
delete the currently listed song, press

/

to select either

RETURN or CANCEL.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

2009 MKX

(mkx)

Owners Guide, 1st Printing
USA

(fus)

Entertainment Systems

20

Summary of Contents for 2009 MKX





















































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKX

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Maserati Quattroporte Automatic Owner'S Manual preview
Quattroporte Automatic
Brand: Maserati Pages: 272
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30

Brands by name

Popular brands

Load more brands