manualshive.com logo in svg

Lincoln 2002 Town Car, Owner'S Manual

The Lincoln 2002 Town Car Owner's Manual is a comprehensive guide that provides detailed instructions and information about operating and maintaining your vehicle. You can easily download the manual for free from manualshive.com, ensuring you have access to all the necessary information to enhance your driving experience.

Share
Download
background image

•

If required, add engine oil to the
engine. Refer to

Adding engine

oil

in this chapter.

•

Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage.

If the engine is

overfilled, some oil must be removed from the engine by a qualified
service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise
until three clicks can be heard.

To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.

DO NOT OVERFILL

Maintenance and Specifications

197

Summary of Contents for 2002 Town Car


























































































































































































































































Reviews:

No comments

Related manuals for 2002 Town Car

Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Barker 25895 Owner'S Instructions preview
25895
Brand: Barker Pages: 2
APS Auto Parts Specialist iBoard IB-ZK406 Installation Instructions preview
iBoard IB-ZK406
Brand: APS Auto Parts Specialist Pages: 3
Allen Sports QR545 Instructions preview
QR545
Brand: Allen Sports Pages: 2
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Ecco Vantage 12 Series Installation And Operation Instructions preview
Vantage 12 Series
Brand: Ecco Pages: 5
Nav TV AUDI A6 Installation Manual preview
AUDI A6
Brand: Nav TV Pages: 5
Dodge Ram Commercial2016 Owner'S Manual preview
Ram Commercial2016
Brand: Dodge Pages: 675
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Brand: Honda Pages: 372

Brands by name

Popular brands

Load more brands