manualshive.com logo in svg

Lincoln 2002 Town Car, Owner'S Manual

The Lincoln 2002 Town Car Owner's Manual is a comprehensive guide that provides detailed instructions and information about operating and maintaining your vehicle. You can easily download the manual for free from manualshive.com, ensuring you have access to all the necessary information to enhance your driving experience.

Share
Download
background image

•

the ignition switch is in the OFF position

•

all vehicle doors are closed

•

the driver’s safety belt is unbuckled

•

the parklamps/headlamps are in OFF position (If vehicle is equipped
with Autolamps, this will not affect the procedure.)

To reduce the risk of injury, do not deactivate/activate the Belt
Minder feature while driving the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)

2. Wait until the safety belt warning light turns off. (Approximately 1–2
minutes)

•

Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.

3. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled. This can be done before or during BeltMinder
warning activation.

4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.

5. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled.

•

After step 5 the safety belt warning light will be turned on for three
seconds.

6. Within seven seconds of the safety belt warning light turning off,
buckle then unbuckle the safety belt.

•

This will disable BeltMinder if it is currently enabled, or enable
BeltMinder if it is currently disabled.

7. Confirmation of disabling BeltMinder is provided by flashing the safety
belt warning light four times per second for three seconds.

8. Confirmation of enabling BeltMinder is provided by flashing the safety
belt warning light four times per second for three seconds, followed by
three seconds with the safety belt warning light off, then followed by
flashing the safety belt warning light four times per second for three
seconds again.

9. After receiving confirmation, the deactivation/activation procedure is
complete.

Seating and Safety Restraints

119

Summary of Contents for 2002 Town Car


























































































































































































































































Reviews:

No comments

Related manuals for 2002 Town Car

Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Toyota AURION 2013 Owner'S Manual preview
AURION 2013
Brand: Toyota Pages: 371
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
Mobridge DA-G2 MOST150 Manual preview
DA-G2 MOST150
Brand: Mobridge Pages: 20
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
MacNeil Pet Barrier Instruction Manual preview
Pet Barrier
Brand: MacNeil Pages: 2

Brands by name

Popular brands

Load more brands