manualshive.com logo in svg

Lincoln 2002 Town Car, Owner'S Manual

The Lincoln 2002 Town Car Owner's Manual is a comprehensive guide that provides detailed instructions and information about operating and maintaining your vehicle. You can easily download the manual for free from manualshive.com, ensuring you have access to all the necessary information to enhance your driving experience.

Share
Download
background image

Vehicle Communication System Limitations

•

Vehicle Communication System services are available in the 48
contiguous states and Hawaii

•

Vehicle Communication System services are not available in Alaska

•

Only available within range of the cellular systems

•

Connection limited by atmospheric and topographical conditions

•

Connection limited by cellular network capabilities and infrastructure

•

The wireless phone must have an active wireless service plan with
Sprint PCS and docked in the docking station located in the center
console for Vehicle Communication System to function properly

•

The vehicle must be running or the ignition must be turned to either
“ACC” or “RUN/ON” position

•

May become inoperative if the vehicle is involved in an accident,
damaging one or more components

•

Sprint PCS Voice Command (SM) services are only available on the
Sprint PCS network

Global Positioning Satellites are used to deliver location information
(only at the request of the vehicle occupants or in the event an airbag
deploys) and may not be available if signal is obstructed. (If a signal is
unavailable, the last valid position obtained before the signal was
obstructed will be sent.)

Vehicle Communication System is powered by the vehicle’s battery and
will not operate if the battery is discharged or disconnected.

Vehicle Communication System specialist will make all reasonable efforts
to contact the Public Safety service providers but cannot be held
responsible for their response time or their activities.

Drivers have the responsibility to pay primary attention to the road and
drive safely. A driver may want to pull over to a safe parking spot before
using Vehicle Communication System services. Drivers who allow
themselves to become distracted may cause an accident. Please use this
technology responsibly.

Due to the specialized Lincoln software contained within the phone, your
local Sprint PCS store is unable to provide service or replacement units.
Issues or questions about equipment including the wireless phone should
be directed to your Lincoln dealer.

Driver Controls

76

Summary of Contents for 2002 Town Car


























































































































































































































































Reviews:

No comments

Related manuals for 2002 Town Car

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Brand: Nav TV Pages: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Brand: Saab Pages: 304
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12

Brands by name

Popular brands

Load more brands