Lincoln pool  equipment HD Series Owner'S Manual Download Page 19

Page 4

Page 19

WARRANTY

Your LINCOLN Auto Clean Pool Chlorinator carries the following warranty 

should a fault occur due to faulty materials or manufacture.

LINCOLN warrants the original purchaser of the control panel for a period of 

two years from the date of purchase by the pool owner should examination 

disclose that this particular equipment failed due to faulty materials or 

manufacture. LINCOLN warrants the original purchaser of the cell electrode 

for a period of fi ve years pro-rata (one year full, four years pro-rata) from 

the original date of purchase by the pool owner should examination disclose 

that this particular equipment failed due to faulty materials or manufacture. 

The warranty does not apply to any material supplied or workmanship 

performed by others in the process of installing the equipment.  Nor does it 

apply if the equipment has been repaired or altered by any one other than 

LINCOLN personnel or a LINCOLN Representative.  This warranty does not 

apply if the equipment has been subject to misuse or misapplication. 

Chlorinators used for commercial use are limited to a total one year 

warranty. Commercial use is any use other than a single household pool.

The warranty applies to materials and workmanship only.

This warranty does not cover an act of god, i.e. storm and tempest, lightning 

strike, fl oods, tsunami, earthquake etc. LINCOLN or its agent will replace 

at no charge, all parts, which show faulty materials or workmanship.  The 

equipment under warranty claim must be returned to LINCOLN for repair or 

replacement.  Cost associated with freight and incidental charges resulting 

from goods being returned to LINCOLN are at the customer’s expense. The 

foregoing constitutes the entire liability of LINCOLN to the original owner 

of the equipment.  There are no other warranties, expressed or implied, 

including but not limited to the implied warranties of merchantability or 

fi tness for a particular purpose other than those contained herein.

In no event will LINCOLN be liable to the original or subsequent owners 

either directly or as an indemnitor, or any direct, incidental or consequential 

loss, damage or economic loss, damage or injury to any person or property 

arising out of or relating to the equipment or any parts supplied in the 

equipment, except as expressly stated herein.

No other person, or company or organisation is authorised to make 

any warranties, guarantees or representations, or allowed to allow any 

exceptions to this warranty, or assume any other liability or obligation on 

behalf of LINCOLN in connection with the equipment. This warranty shall 

not extend to any expenditure incurred.

www.linc.com.au

When using a pool cleaner, the display may sometimes indicate reduced or 

fl uctuating chlorine output levels. This is due to the presence of air bubbles 

in the electrolytic cell and is normal. Even when a cleaner is not used, a 

small amount of output fl uctuation can be expected due to small changes in 

the mains voltage to your home.

Salt concentrations in excess of 

00ppm (

 grams per litre) can cause 

the chlorinator to become overloaded. If the STATUS indicates HIGH SALT 

reduce the Chlorine Output and add water. 

In the event of an OVERLOAD condition occurring, the chlorinator will 

cease operation for one minute and automatically reduce the output power 

by 1%. It will then resume operation at this reduced power setting. If an 

OVERLOAD condition is encountered once again, the above cycle will 

repeat until the output power is reduced to level which no longer causes an 

OVERLOAD condition to exist, even though the salt concentration may be 

exceedingly high.

Ensure that you check the salt concentration of your water regularly. If the 

salt concentration is over 

00 ppm (

 grams per litre) it is advisable that 

you dilute with the addition of water.

LINCOLN OVERVIEW

BACKLIT LCD DISPLAY

BACKLIT CONTROL 

BUTTONS

OPERATION 

MODE

CHLORINE 

OUTPUT 

DISPLAY

POWER LEVEL 

BAR

CURRENT 

STATUS

ELECTRODES

CLEAR HOUSING

SCREW ON CAP

FOR EASY REMOVAL

OF ELECTRODES

CHLORINATOR CONTROL UNIT

CHLORINATOR SALT CELL

Summary of Contents for HD Series























Reviews: