Section 3: Installation
Spirit II User’s Manual
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
3-20
Plasma Console Connections
Perform the following steps to connect the plasma console to the Spirit system.
CAN Communications
•
Insert the male end of the CAN communication cable. See "CAN Communication
Connections" for more details.
CAN Communications
•
Insert the female end of the CAN communication cable or the CAN termination plug,
depending upon the connection scheme. See "CAN Communication Connections"
for more details.
RS-422 Communications
•
Insert an RS-422 cable, if necessary, to connect to other devices.
RS-422 Communications
•
Insert an RS-422 cable, if necessary, to connect to other devices.
USB
•
Either USB port can be used to update the Spirit II software.
Ethernet
•
No connection. For future development.
36
37
38
39
40
41
Pin
Signal
1 .......... Gnd
2 .......... TX-
3 .......... TX+
4 .......... RX-
5 .......... RX+
6 .......... N/C
7 .......... N/C
8 .......... N/C
9 .......... N/C
RS-422 Pinout
1
4
7
3
6
9
41
38
39
36
37
40
