English 6 English
Controls and Operational Features
1
5
4
17
3
2
Figure 1
6
7
8
9
10
Figure 2
1. EURO Socket: For connecting a welding
gun (for GMAW, FCAW process).
2. Quick Coupling Socket: Coolant outlet
(supplies cool coolant to the welding gun).
3. Quick Coupling Socket: Coolant inlet (takes
warm coolant from the welding gun).
WARNING
Maximum coolant pressure is 5 bar.
4. Output Socket for SMAW and CAG welding: For
connecting welding cable with an electrode holder.
5. U7 User Interface: See „User Interface
ʺ
section.
6. Gas Quick Coupling Socket: For connecting
a gas pipe.
WARNING
The machine allows the use all suitable shielding gases
with a maximum pressure of 5 bar.
7.
Control Socket: 5 pins socket for
connecting a control cable. The CAN
protocol is used for communication
between the power source and wire feeder.
8. Current Socket: For connecting a welding
cable.
9.
Quick Coupling Socket: Coolant inlet
(supplies cool coolant from cooler to the
welding machine).
10.
Quick Coupling Socket: Coolant outlet
(takes warm coolant from welding machine
to cooler).
11. Gas Flow Regulator Plug: Gas Flow Regulator can
be purchased separately. See "Accessories"
section.
12. Switch: Cold Inch / Gas Purge: This switch allows
wire feeding (wire test) and gas flow (gas test)
without switching on the output voltage.
13. Transport Holder: For the feeder lifting and
transporting using a crane.
14. Wire Spool Holder: For wire spool with maximum
16kg weight. Holder allows mounting plastic, steel
and fiber spools on the 51mm spindle.
WARNING
Be sure that wire spool case has to be completely closed
during welding.
15. Spool with Wire: Not supplied as standard.
16. Wire Drive: 4-rolls wire drive.
WARNING
The side panel and wire spool case have to be completely
closed during welding.
WARNING
Do not use handle to move the machine during operation.
