Lincoln Electric K14336-1, Operator'S Manual

Page: 27 / 58

English 25 English
Restore Factory Setting
WARNING
After Factory Settings restore, the settings stored in user
memory will be deleted.
To restore factory settings:

Access to ʺ Configuration Menu ʺ .

Use the Right Control [21] to highlight the ʺ Restore
Factory Settings ʺ icon.
Figure 73

Press the Right Control [21]. The ʺ Restore Factory
Settings ʺ icon is presented on the display.

Use the Right Control [21] to highlight the ʺ Check
Mark ʺ .
Figure 74

Press the Right Control [21] to confirm selection. The
factory settings are restored.
Machine information
Available information:

Software Version.

Hardware Version.

Welding Software.

Machine IP Address.
Advanced Setup
This menu enables access to the configuration
parameters of the device. To set the
configuration parameters:

Access to ʺ Configuration Menu ʺ .

Use Right Control [21] to highlight the ʺ Advance setup ʺ
icon.
Figure 75

Press the Right Control [21]. The ʺ Advance Manu ʺ is
shown on the display.

Use the Right Control [21] to highlight the parameter
number which will be changed, for example P.1 -
allows change WFS units, factory default: m/min.
Figure 76

Press Right Control [21].

Use Right Control [21] to highlight the in/min
(English/Imperial).
Figure 77

Press the Right Control [21] to confirm selection.