English 15
English
Setup menu
The setup menu contains more parameters that are
hidden from the main control panel functionality.
To enter the Setup menu:
Push and hold “SEL” and “MODE” pushbuttons
+
Keep “SEL” + “MODE” pushed until the display shows
“
”
Then release the Pushbuttons
now is shown the
option number “00”
01
99
Select the desired option: on the left display is shown
the option number
then press “SEL” to confirm
Now enable, disable or change the option value: on the
right display is shown the option status
Save the desired option by pressing the “SEL”
pushbutton
To exit the setup menu select the 00 option and keep
the SEL button pushed for 5 seconds until normal
operation is resumed.
List of menu options
Options
Options
Value
00 Exit
point
--
01 2-step
restart
On/Off
02 4-step
restart
On/Off
10 Spot
welding
On/Off
11 Spot fixed time
On/Off
20 Bi-Level
On/Off
30 Foot
Pedal
On/Off
40 Arc start strenght
1/2/3/4
99 Reset to factory default
To change a setting push SEL, then rotate the encoder
(Output Current Knob) to modify the setting, and push
SEL again to confirm the new value.
