Lincoln Electric CWT ATC-3, Operator'S Manual

Page: 11 / 36

2
2.0 INSTALLATION
2.1 ATC-3 CONTROL
Place the ATC 3 control in a convenient location keeping in mind the motor cable and operator
pendant cable length. Do not install the enclosure directly above the Welding ARC or in a
location that exposes it to direct Weld ARC radiated heat. The control has with two 0.281”
holes located on each end of the enclosure. Figure 2-1 shows the System Layout. Figure 2-2
shows the physical dimensions of the ATC-3 Control Enclosure. Figure 2-3 shows the physical
dimensions of the ATC-3 Operator Pendant.
FIGURE 2-1: System Layout
M
OT
OR
R
EM
O
TE
PE
NDA
N
T
SE
N
SO
R
PO
WE
R
LSA-3007 LINEAR SLIDE
P/N: S2A5052
VOLT-AMP SENSOR
P/N: A3A0296
VOLT-AMP SENSOR
CABLE P/N: A3W0391
ATC-3 ENCLOSURE
AMERICAN 110VAC - P/N: S3A5209
EUROPEAN 220VAC – P/N: S3A5210
REMOTE I/O CABLE
P/N: S3W0227
ATC-3 SMART PENDANT
P/N: S3A5204
MICROSTEP CABLE
P/N: S3W5034