Lincoln Electric B18252-1, Operator'S Manual, Page: 19 / 32

17
13
14 15
17
18
16
13. Wire Drive (for GMAW, FCAW-SS process): 2-Roll wire drive.
14. Welding Wire (for GMAW / FCAW-SS).
15. Spooled Wire (for GMAW / FCAW-SS): The machine does not include a spooled wire.
16. Wire Spool Support: Maximum 15kg spools. Accepts plastic, steel and fiber spools onto 51mm spindle. Also accepts
Readi-Reel
®
type spools onto included spindle adapter.
17. Shield of Changing Polarity.
18. Terminal Block of Changing Polarity (for GMAW / FCAW-SS process): This terminal block enables to set the welding
polarity (+ ; -), which will be given at the welding holder.
Warning: Positive (+) polarity is set at the factory.
Warning: Before welding check the polarity for using electrodes and wires.
If the welding polarity has to be changed, user should:
Switch off the machine.
Determine the wire polarity for the wire to be used. Consult the electrode data for this information.
Take off the terminal block’s shield [17].
The tip of the wire on the terminal block [18] and work lead fix as is shown in the Table 1 or the Table 2.
Put on the terminal block’s shield [17].
Warning: The machine must be used with the door completely closed during welding.
Warning: Not use handle to move the machine during work.