Lincoln Electric B18252-1, Operator'S Manual, Page: 10 / 32

8
Place the adapter of spool type S200 [23] on the spindle [21] making certain the spindle brake pin [22] is put in
the hole in back side of the adapter [23]. The adapter of spool type S200 can be purchased separately (see
"Accessories" chapter).
Place the spool type S200 [25] on the spindle [21] making certain that the adapter brake pin [24] is put in the hole
in the back side of the spool.
Warning! Position the spool type S200 so that it will rotate in a direction when feeding so as to be de-
reeled from bottom of the spool.
Re-install the locking nut [19]. Make sure that the locking nut is tightened.
Wire Spool Type B300 Loading
19
22
21
26 27
Turn the input power OFF.
Open the side panel.
Unscrew the Locking Nut [19] and remove it from the spindle [21].
Place the adapter of spool type B300 [26] on the spindle [21].Make certain that the spindle brake pin [22] is put in
the hole in the back side of the adapter [26]. The adapter of spool type B300 can be purchased separately (see
"Accessories" chapter).
Re-install the locking nut [19]. Make sure that the locking nut is tightened.
26
27
28
29 30
Rotate the spindle and adapter so the retaining spring [27] is at the 12 o'clock position.
Place the spool type B300 [29] on the adapter [26]. Set one of the B300 inside cage wires [30] on the slot [28] in
the retaining spring tab [27] and slide the spool onto the adapter.
Warning! Position the spool type B300 so that it will rotate in a direction when feeding so as to be de-
reeled from bottom of the spool.