“
RANGE” SWITCH
The “Range” switch is used to select one of four
amperage ranges with generous overlap for Stick/TIG
welding.
Never change the “RANGE” Switch setting while
welding. This will damage the switch.
------------------------------------------------------------------------
“
CONTROL” DIAL
Provides a fine welding current adjustment within the
Range Switch settings in the STICK mode and weld-
ing voltage control with the Range switch set in the
wire feed mode.
Process Range Setting Current Range
B-2
OPERATION
B-2
EAGLE™ 10,000 PLUS
CAUTION
KOHLER
23 H.P. COMMAND CH23S
.40 Gallons/Hour
(1.50 Liters/Hour)
.7 Gallons/Hour
(2.8 Liters/Hour)
1.3 Gallons/Hour
(4.9 Liters/Hour)
1.4 Gallons/Hour)
(5.3 Liters/Hour)
Low Idle - No Load
2400 RPM
High Idle - No Load
3700 RPM
DC CC Weld Output
210 Amps @ 25 Volts
Auxiliary Power
9000 Watts
EAGLE™ 10,000 PLUS APPROXIMATE FUEL CONSUMPTION
STICK/TIG
(Constant current)
(3 range settings)
90 Max.
145 Max.
225 MAX.
40 to 90 Amps
70 to 145 Amps
120 to 225 Amps
Summary of Contents for 000 PLUS IM10028-B
Page 32: ...NOTES EAGLE 10 000 PLUS...
Page 33: ...NOTES EAGLE 10 000 PLUS...
