IS433 ECN3503
12
SERVICING
SERVICE ACCESS
To access and service the gas control valves
•
Remove the control knobs and fascia panel to gain access to the valves.
•
Remove the two screws securing the valve boss and carefully withdraw the spindle
from the valve.
•
Grease as necessary and refit parts. Carry out gas soundness check.
FASCIA PANEL REMOVAL
See page 8 for details
OPERATIONAL CHECK
Commissioning must include an operational check of all controls.
•
Check that each burner can be lit at both full rate and low rate.
•
Check that each burner will remain lit when turned to low rate.
•
Set the Oven thermostat at its lowest setting and check that on the oven attaining the set
temperature the amber light goes out.
