IS433 ECN3503
6
NOTE
COMMISSIONING
PREPARATION
Remove all packaging and protective coatings prior to installation.
Check that the burner caps have been fitted correctly to the burner body and the Pan Supports are
located.
VENTILATION
The area in which this equipment is to be installed should have sufficient fixed ventilation to comply
with local legislation requirements. It is recommended that a room, or internal space, be provided
with a minimum free area of 4.5cm
2
per kW (3,400Btu/hr) of total heat input.
OD7007 OD7006
CHECK LIST OF ENCLOSURES
Please ensure the following items are included with this piece of equipment:
Model
OD7006
OD7007
Tick
Wire Shelf
3
3
Ignitor Wand
1
1
Pan Supports
2
3
Warranty Card
1
1
User Instructions
1
1
SERIAL NUMBER
Each appliance manufactured at Lincat has a unique identifying number found in the top
right hand corner of the data plate attached at the rear of the appliance. Please record that
number in the space provided should it be required for future reference.
Serial Number
MARK OF CONFIDENCE
