IS425 ECN 3607
Page 7 of 13
EB3F/PBM PROGRAMMING GUIDE
The PBM version of the EB3F has the option to preset upto 3 measured dispense sizes.
This quick guide shows the procedure for programming the water boiler.
The measured dispense can only be set when the unit is full and upto temperature. So
connect the unit to the water supply and electric, allow 30 minutes for the unit to fill and
heat.
To enter the programming mode, turn the electric off to the unit.
Press and
hold the “power button” and turn the electric on. After a
few seconds the programming mode is entered.
Push the “Fn” button until the Use dispense screen is visible.
Pressing set turns off the timed dispense and the unit changes to
Push and hold for dispensing
Press next.
Press set to select 1, 2 or 3 measured dispenses.
Press next.
Press yes to select to set the dispense volumes.
Or next to exit.
Select the size to set.
Press OK.
Press and hold the Hot water button to fill the chosen cup / mug.
Release the button when the cup is full.
After filling there is a chance to test the volume and then either
repeat the setting procedure or accepting the set volume.
Press OK to accept
Press exit to return to the standard User screen or next to
continue and programme more sizes.