Page 34 of 80
Actuator with endstop signals and absolute positioning - PWM
Input/Output
Specification
Comments
Description
The actuator can be equipped with elec-
tronic circuit that gives an analogue feed-
back signal when the actuator moves.
See connection diagram,
fig. 10, page 34
Brown
12 or 24VDC (+/-)
12V ± 20%
24V ± 10%
Under normal conditions:
12V, max. 26A depending on load
24V, max. 13A depending on load
To extend actuator:
Connect Brown to positive
To retract actuator:
Connect Brown to negative
Blue
To extend actuator:
Connect Blue to negative
To retract actuator:
Connect Blue to positive
Red
Signal power supply (+)
12-24VDC
Current consumption:
Max. 60mA, also when the actuator is
not running
Black
Signal power supply GND (-)
Green
Endstop signal out
Output voltage min. V
IN
- 2V
Source current max. 100mA
NOT potential free
Yellow
Endstop signal in
Violet
Digital output feedback (PNP)
10-90% (Option 5)
20-80% (Option 6)
Output voltage min. V
IN
- 2V
Tole/- 2%
Max. current output: 12mA
Frequency: 75Hz
It is recommendable to have the
actuator to activate its limit switches
on a regular basis, to ensure more
precise positioning
White
Not to be connected
I/O specifications:
