Linak DESKLINE DPG1B User Manual Download Page 64

Page 64 of 71

Disposal of LINAK products

As our customers often ask us how our products can be disposed of or scrapped we have prepared this guidance 
that enables a classification to different waste fractions for recycling or combustion.

Guidance

We recommend that our products be disassembled as much as possible and divided into different waste groups 
for recycling or combustion.
For example, waste can be sorted into metals, plastics, cable scrap, combustible material and recoverable 
resources.
Some of these main groups can be further divided into subgroups; e.g. metal can be divided into steel/
aluminium/copper and plastic can be divided into ABS/PA/PE/PP.
As an example, the table below breaks down the different components in LINAK products to various recycling 
groups:

Product 

Components 

Recycling group

Handset/Control: 

Plastic housing 
Cable 
PCB board 

Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap

By now, almost all our casted plastic parts are supplied with an interior code for plastic type and fibre contents, 
if any.

Main groups of disposal

Product main 
groups 

Metal scrap Cable scrap

Electronics 

scrap

Plastic recycling 

or combustion

Comments

Bluetooth

®

 

Adapter

X

X

DPG

X

X

X

Disposal of batteries

"Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed in accordance with appropriate federal, state and local regulations. LINAK 
recommends that used or leaking batteries are disposed through local recycling system. Please do not throw 
used or leaking batteries in normal household waste or in nature. This will cause damage to the environment. 

How to deal with leaking batteries

Leaking batteries should be disposed as described above. 
If leaking batteries are discovered in the product, the batteries must be removed at once to minimise damage to 
the product. 
If leaking batteries are left in the product, it becomes defective.

It is recommended to use plastic gloves when handling leaking batteries. The contents of leaking batteries can 
cause chemical burns and respiratory irritation. 

If exposed to the contents of a leaking battery, please wash with soap and water. If irritation persists, please 
seek medical attention. In case of eye contact, please flush eyes thoroughly with water for 15 minutes and seek 
medical attention."

Summary of Contents for DESKLINE DPG1B








































































Reviews: