manualshive.com logo in svg

Linak DESKLINE DPG1B, User Manual, Page: 36 / 71

Share
Download
Linak DESKLINE DPG1B User Manual Download Page 36

Page 36 of 71

DPG1C

The DPG1C has three operation buttons.

Figure 32: DPG1C operation buttons

Display

The DPG1C has an OLED display, which shows the height during drive of the desk and many other texts to guide 
the users.

Adjusting the displayed height of the desk

If the height shown in the display is not correct, it can be adjusted.
1. Press     the and the    buttons on the DPG1C at the same time for five seconds and the height in the display
    starts to flash.
2. Tilt the DPG1C to change the displayed height without moving the desk. Tilt up to increase the displayed 
    height, tilt down to decrease the displayed height.
3. Press any button to confirm the height or wait for 10 seconds for automatic confirmation.

Changing the measurement unit

The measurement unit shown in the display can be set to either cm or inch.
1. Press      and     buttons on DPG1C at the same time for five seconds and the current measurement unit 
    flashes in display.
2. When e.g. “CM” flashes in display, tilt DPG1C once to change measurement unit to inch. “INCH” now flashes 
    in display.
3. Press any button to confirm measurement unit or wait for 10 seconds for automatic confirmation.

Symbol

Description

Function

Reminder

Setting reminders

Bluetooth

®

Connecting the Desk Control

TM

 App via Bluetooth

®

 wireless technology

Favourite

Saving favourite positions

Each button has a specific function:

Summary of Contents for DESKLINE DPG1B








































































Reviews:

No comments