LIMIT 210, Operating Manual

Page: 14 / 14

14
English
3. Connect the test leads across with the object being measured. The measured value shows on
the display.
Capacitance (See fig 1)
1. Turn the rotary switch to ╫ position.
3. Push REL Δ button.
4. Connect the test leads across with the object being measured. The measured value shows on
the display.
To minimize the measuring error caused by the distributed capacitor, the testing lead should be
short as possible. For measuring capacitance higher than 10 µF, it is normal taking several
seconds to obtain a reading.
Replacing the battery (See fig 2)
1. Disconnect the connection between the testing leads and the circuit under test when battery
indicator appears on the display.
2. Turn the Meter to OFF position.
3. Remove the screw, and separate the case bottom.
4. Replace the battery with a new 3V battery type CR2032.