LIMIT 210, Operating Manual

Page: 12 / 14

12
English
Note. The meter will be at max DCV 400 mV or ACV 4 V when
Hz/Duty mode is on. It is important to turn off and on again to resume to
auto range mode when measuring higher voltage.
Voltage measurement DC and AC (See fig 1)
1. Turn the rotary switch to DCV position for DC or ACV~ for AC.
2. Connect the test leads across with the object being measured. The measured value shows on
the display.
Resistance measurement (See fig 1)
1. Turn the rotary switch to Ω► » position.
2. Select Ω with SELECT button. Display shows resistance symbol Ω .
3. Connect the test leads across with the object being measured. The measured value shows on
the display.
The test leads can add 0.1 Ω to 0.3 Ω of error to resistance measurement. To obtain precision
readings in low-resistance measurement, that is the range of 400 Ω , short-circuit the input
terminals beforehand and record the reading obtained. This is the additional resistance from the
test lead.